How do I Perform a Shunt Calibration With the ScopeCorder Strain Gage Module?

Resources:

Shunt Cal.ppt

To perform a shunt calibration using the 701271 strain gage module and the ScopeCorder, please complete the following procedures:

Connect the strain module 701271, bridge head 701957/701958 and the strain gauge
Attach the shunt resistor to the bridge head
Set the range unit, range, excitation voltage, and gauge factor
Press the Exec Balance soft key
Enter the reference strain value corresponding to the attached resistor for P2:Y
Select the Unit
Execute the Shunt Cal to perform the calibration
After the calibration is done, the P1:X and P2:X values as well as the Upper and Lower Scale will have changed
If negative strain direction is selected, the P2:Y value must be negative and the P2:X value will also be negative after calibration

Please refer to the attached file for more details on shunt calibration.

Related Products & Solutions

Data Acquisition (DAQ)

Yokogawa data acquisition systems give you the most flexibility and power to measure, display, store, and even actuate any number of physical or electrical phenomena.

High Speed Data Acquisition

PC-based, streaming, local or remote operation
20+ modules, isolated and versatile inputs
Up to 200 MS/s or 640 ch

Oscilloscopes

Digital oscilloscopes
High-speed sampling
Range of bandwidths for electronic device design and development
Advantages of oscilloscope and multi-channel data recorder

SL1000 High-Speed Data Acquisition Unit

Predecessor to SL2000. A PC-based ScopeCorder system capable of synchronizing multiple chassis.

ScopeCorders

An integrated measurement system for every electromechanical application
Modular platform combines oscilloscope and DAQ functionality
Capture high-speed transients and low-speed trends

WE7000 PC-Based Measurement Instruments

One system, multiple instruments: WE7000 satisfies demands for fast, reliable and precise data acquisition which uses a standard laptop or PC as its user interface. Input modules plug into an expandable measuring station. Via the optical interface, it is possible to galvanically isolate the laptop/PC.